Custom Drip Edge & Eave Flashing

Drip edge is the small detail that decides whether a roof edge sheds water cleanly or rots the fascia in five years. For roofing crews and builders, the difference between a stock big-box profile and a purpose-fabricated one shows up in fit, coverage and how the eave reads from the ground. This guide covers the profiles, gauges and dimensions we fabricate for trade partners nationwide, plus exactly what to send when you order.

Drip edge vs. eave flashing: the terms

Drip edge is the L- or T-shaped metal that runs along eaves and rakes, directing runoff away from the fascia and into the gutter. Eave flashing (sometimes called a starter or gutter apron) is the broader term for edge metal at the eave, and it often works together with an ice-and-water membrane. On a standing seam or metal panel roof, the equivalent piece may be an eave trim or rake trim with a hemmed drip leg. Whatever you call it on the plans, we fabricate to your profile.

Common profiles we fabricate

• Type C (L-style): a simple L with a hemmed lower leg — the workhorse for shingle eaves and rakes.
• Type D / T-style: a T-shaped profile with a longer projection that kicks water further off the fascia; preferred by many inspectors on eaves.
• Gutter apron: a wide-leg profile that laps behind the gutter back so water can’t wick behind it.
• Metal-roof eave & rake trim: hemmed drip legs and custom face heights to match panel profiles and cleat details.

If you’re matching an existing detail, send a cross-section or a physical sample and we’ll replicate the legs, face height and hem.

Material & gauge

We run drip edge and eave flashing in both aluminum and steel. Typical choices for trade orders:

• Aluminum: commonly .019″–.032″ for residential edge metal — light, corrosion-resistant and easy to handle on the ladder.
• Steel: heavier-duty edge and eave work where rigidity or a longer face matters, in painted or galvanized stock.

Gauge and material should follow the project’s wind, corrosion and color requirements. Not sure what to spec? Tell us the application and we’ll recommend a stock — see our guide to spec’ing trim & flashing and our aluminum vs. steel comparison.

Finish & color

Match the drip edge to the fascia, gutter or roof rather than settling for whatever’s on the shelf. We fabricate from painted coil in a wide range of colors so your edge metal ties into the rest of the exterior. Browse our Color Options or request the current color chart with your quote.

Lengths, hems & tolerances

We brake-form to order in custom lengths — long runs mean fewer laps, cleaner lines and less labor on the eave. Hemmed drip legs (a folded-back edge) add rigidity and remove the raw cut edge; specify hemmed or open. For dimensions, give us the overall girth, each leg length, the face height and the bend angles. If you’re matching existing trim, a sample is the most reliable reference.

How to order

Send these five things and your quote comes back fast and accurate:

• Profile: a drawing, photo or physical sample of the detail.
• Dimensions: girth, leg lengths, face height and bend angles.
• Material, gauge & color: aluminum or steel, the gauge, and the finish.
• Lengths & quantity: piece lengths and total count — volume affects pricing.
• Timeline: when you need it; we fabricate to order and confirm a lead time with your quote.

Made in Ogden and shipped nationwide, we build edge metal for roofing and siding crews who’d rather spec the right profile once than fight a stock piece on every job. Submit your specs and we’ll price it live.

Request a Fabrication Quote